F 250 2WD Pickup V8-4.6L SOHC VIN 6 (1999)
7. On Heavy-Duty, use a brake drum micrometer to measure the brake drum inside diameter. Replace if brake drum exceeds maximum inside
diameter.
Installation
WARNING: Improperly tightened lug nuts could allow the wheel to come off while the vehicle is in motion, causing loss of control.
1. If adjusting the rear brakes with brake drums removed.
2. Install the brake drum.
3. If adjusting the rear brakes with the brake drums installed.
4. WARNING: Always remove any corrosion, dirt or foreign material present on the mounting surfaces of the wheel or the surface of the
wheel hub or brake drum that contacts the wheel. Installing wheels without proper metal to metal contact at the wheel mounting surfaces
can cause the lug nuts to loosen and could allow the wheel to come off while the vehicle is in motion, causing loss of control.
Clean the wheel hub mounting surface.
5. Install the tire and wheel assembly.
6. NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
Lower the vehicle.
7. Remove the pin in the parking brake control and verify proper parking brake operation.
8. Check brake operation before driving.
