F 250 2WD Pickup V8-4.6L SOHC VIN 6 (1999)
CAUTION: Do not use air tools. The A/C clutch field coil can be easily damaged.
INSTALLATION
1. Clean the A/C clutch field coil and the pulley bearing mounting surfaces.
2. Install the A/C clutch field coil.
1
Place the A/C clutch field coil on the A/C compressor with the A/C clutch field coil electrical connector properly positioned.
2
Place the Field Coil Replacer on the A/C clutch field coil.
3
Place the Coil Replacer on the Field Coil Replacer.
4
Use the 2-Jaw Puller to install the A/C clutch field coil until bottomed completely against the A/C compressor.
CAUTION: Do not use air tools. The A/C clutch field coil can be easily damaged.
3. Install the A/C clutch pulley.
NOTE: The A/C clutch pulley is a tight fit on the A/C compressor head; it must be properly aligned during installation.
4. Install the pulley snap ring with the bevel side out.