F 250 2WD Pickup V8-4.6L SOHC VIN 6 (1999)
Spindle: Service and Repair
Removal
1. WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking, or towing an air suspension
vehicle. This can be accomplished by turning off the air suspension switch located in the RH kick panel area. Failure to do so can result in
unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during these operations.
Raise the vehicle on a hoist.
2. Remove the wheel and tire assembly.
3. Remove the brake disc shield.
4. Use a suitable jack to support the front suspension lower arm.
5. Remove the upper ball joint castellated nut.
1. Remove the cotter pin.
2. Remove the nut.
