ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

In Tank Fuel Filter - Damage Prevention|Page 885 > < Instrument Cluster Warning Lights - Dimly Lit|Page 880
Page 1
background image

Fuel Pump Pickup Filter: Technical Service Bulletins
In Tank Fuel Filter - Damage Prevention

Article No. 83-25-22

FUEL SYSTEM - (7.5L) - DAMAGE TO IN-FUEL TANK FILTER ASSEMBLY ON UNITS WITH IN-TANK ELECTRIC FUEL PUMPS

LIGHT TRUCKS 1983 E AND F SERIES

Improper fuel sender removal on 7.5L applications with electric in-tank fuel pump can result in damage to the filter. This results in the sender being
replaced, even though the original concern may have been only to replace a gasket.

The fuel pump/senders listed below (Engineering Part Number) all use filter part number D7AZ-9A011-A. If, when removing one of the senders from
the fuel tank the filter is damaged, replace it with part number D7AZ- 9A011-A.
Vehicle

Sender Part No. Application

Econoline

E3UF-9H307-AD7.5L, 22 Gal. Aft Axle Tank

Econoline

E3UF-9H307-BD7.5L, 22 Gal. Aft Axle Tank

Econoline

E3UF-9H307-CC7.5L, 18 Gal. Midship Tank

F Series/Bronco

E3TF-9H307-AD7.5L, 19 Gal. Midship Tank

F Series/Bronco

E3TF-9H307-BD7.5L, 19 Gal. Aft Tank (Steel)

F Series/Bronco

E3TF-9H307-CD7.5L, 19 Gal. Aft Tank (plastic)

The above are all pump/senders used on hot fuel handling applications. Replacing the filter only, instead of the entire pump/sender, will reduce the unit
service costs.

In Tank Fuel Filter - Damage Prevention|Page 885 > < Instrument Cluster Warning Lights - Dimly Lit|Page 880