F 250 2WD Pickup V8-460 7.5L (1983)
Accelerator Pump: Adjustments
Accelerator Pump Level
Fig. 6 Checking accelerator pump lever clearance
1.
Using a feeler gauge and with throttle plates wide open, there should be the specified clearance (minimum) between pump operating lever
adjustment screw and pump arm when pump arm is depressed manually, Fig.6.
2.
If adjustment is required, loosen lock nut and turn adjusting screw in to increase clearance and out to decrease clearance. One-half turn of screw is
equal to approximately .015 inch.
3.
When proper adjustment has been made, hold screw in position with a wrench and tighten lock nut.