F 250 2WD Pickup V8-5.4L CNG VIN M (1999)
Fuel Injector Wiring Harness: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the air cleaner outlet tube and the engine air cleaner outlet.
3. Disconnect the 42-pin connector.
1
Loosen the bolt on the 42-pin connector.
2
Disconnect the 42-pin connector.
4. Disconnect the 16-pin connector.
5. Disconnect the injection pressure sensor and the fuel temperature sensor connectors.
6. Disconnect the RH coil-on-plug and the RH fuel injector connectors.
