F 250 2WD Pickup V8-6.9L DSL (1985)
Figure 7
If pedal travel is low on 1984-86 vehicles, remove the pedal stop (see Figure 7). If pedal travel is low on vehicles without a stop, look for excessively
thick floor mats and carpeting limiting travel.
^
Cross-shaft attachments loose:
Attaching nuts between the pedal and pedal shaft and also between the pedal shaft and lever should be checked for looseness. If loose, tighten (see
Figure 7).
^
Clutch Pedal Linkage Adjustment:
Disconnect the cotter pin (380699-S) and the master cylinder pushrod from the clutch lever (7A554). Refer to Figure 7.
