ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Technical Service Bulletins for Ignition Control Module: > < Firing Order|Specifications
Page 1
background image

Ignition Control Module: Customer Interest
Tape Player - Ignition Noise Through Speakers

RADIO - IGNITION NOISE THROUGH FACTORY

Article No.

TAPE PLAYER - 4.9L - WITH TSB MODIFICATION87-3-20

87-7-20

LIGHT TRUCK:

1984-86 F SERIES, BRONCO

ISSUE:

Ignition noise through the radio speakers when operating the radio in the tape player mode may result if a new multispark ignition module
was installed to correct a rough idle condition per TSB 87-3-20.

ACTION:

To correct this, modify the multi-spark ignition module wire harness as outlined in the following service procedure.

1.

Shorten the heavy gauge BLACK wire on the module to 14 inches (357 mm). Crimp on a new solderless lug and hook up wire directly to negative
terminal of battery.

2.

Perform TSB 86-24-26 to eliminate the radio noise.

OTHER APPLICABLE ARTICLES: 86-24-26, 87-3-20
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual
OPERATION: SP870720A
TIME:

0.3 Hr. 

DLR. CODING:

Basic Part No. 12A199
Code: 85

All Technical Service Bulletins for Ignition Control Module: > < Firing Order|Specifications