ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Other Service Bulletins for Vacuum Regulator Valve: > < A/T Vacuum Regulator Valve - Adjustment Procedure|Page 2564
Page 3
background image

The vacuum gauge must indicate at least 13 inches (throttle at idle position). If vacuum gauge indicates less than 13 inches, the VRV must be
replaced and the new VRV adjusted per the above procedures.

11.

After making the check or adjustment, remove the vacuum pump and gauge from the VRV and reattach the vacuum connector.

12.

Start engine and check throttle operation and check transmission shifts.

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"

All Other Service Bulletins for Vacuum Regulator Valve: > < A/T Vacuum Regulator Valve - Adjustment Procedure|Page 2564