F 250 2WD Pickup V8-6.9L DSL (1985)
Figure 7
2.
Determine if the clutch master cylinder pushrod and lever pin are correctly aligned by disconnecting the pushrod and seeing if it will reassemble to
the pin WITHOUT DEPRESSING THE PUSHROD OR DEPRESSING THE CLUTCH PEDAL. (When the pushrod is disconnected from the
pin, the clutch master cylinder piston is fully retracted (rearward) and the clutch pedal blade is contacting the rubber bumper stop), see Figure 7.
3.
If the two components are not in alignment, perform the following IN THIS EXACT SEQUENCE:
a.
Loosen the clutch pedal attaching nut (left hand side).
