F 250 2WD Pickup V8-7.3L DSL (1990)
Door Skin Bonding Kits- (3-kits req'd per truck)
08190
* 3M Automix Applicator Gun
*
APPLICATOR GUN REIMBURSABLE ONE TIME ONLY FOR THIS PROGRAM
Parts prices current until next issue of Master Price Book. For latest prices, check or call your:
^
Order Processing Center
^
DOES II
^
Updated Price Book.
Claims Preparations
^
Use Form 1863.
^
Enter using DWE.
^
Use code information shown below:
Program Code
- B93
Causal Basic Part Number
- 711135
Condition Code
- 79
Labor operation
- B93
Technical Instructions
ATTACHMENT III-1
OWNER NOTIFICATION PROGRAM B93
FLOOR PAN REINFORCEMENT 1989/90
BRONCO AND F-SERIES SUPERCAB WITH CAPTAIN CHAIR OPTION
TECHNICAL INSTRUCTIONS
This floor pan reinforcement program will strengthen the area and prevent future cracking.
A.
Inspect floor pan for cracks near seat track attachments.
1.
Remove both front seats. (See Shop Manual Section 41-01).
2.
Inspect seat tracks for cracks. Replace all damaged tracks.
3.
Remove or peel back carpet/mats. (See Shop Manual Section 45-26).
4.
Inspect all seat track-to-floor pan attachment nuts. Weld any loose nuts to floor pan.
5.
Inspect top side of floor pan for cracks:
If floor pan is not cracked, go to Step B-1 and reinforce both sides with small reinforcements.
If floor pan is cracked, go to Step B-10.
