F 250 2WD Pickup V8-7.3L DSL (1990)
9.
Snap an assembled insulator into the inside diameter of each caliper piston. Be sure the assembly is firmly seated on the rim of the piston. See
Figure 2.
10.
Install the inner and outer brake linings.
11.
Clean the caliper slide surfaces on the caliper and the spindle with a wire brush and lubricate with Disc Brake Caliper Slide Grease,
D7AZ-19590-A (ESA-M1C172-A) or equivalent.
12.
Reinstall the brake calipers. Refer to the appropriate shop manual for the procedures.
13.
Install the wheel and tire assemblies.
BRAKE TUBE INSULATOR JACKET KIT
INSTALLATION INSTRUCTIONS
