F 250 2WD Pickup V8-7.3L DSL (1990)
Transmission Mounted Parking Brake Disassembly And Assembly
17. Install the shim on the mainshaft.
NOTE: This shim determines mainshaft end play, and it is available in thicknesses in variances of 0.0019 inches.
18. Install the inner bearing cone onto the mainshaft.
In order to measure mainshaft end play, install the bearing spacer without the O-ring onto the mainshaft.
Transmission Mounted Parking Brake Disassembly And Assembly
19. With the case assembly and mainshaft clamped firmly in the vise, screw the hex locknut onto the mainshaft. Tighten the nut to 288-292 Nm
(212-216 ft-lb).
Transmission Mounted Parking Brake Disassembly And Assembly
