F 250 2WD Pickup V8-7.3L DSL (1990)
Crankshaft Main Bearing Seal: Service and Repair
1.
Remove transmission, then the clutch and clutch housing.
2.
Remove flywheel, then the rear cover.
3.
Using an arbor press and a 4 1/8 inch spacer, remove oil seal.
4.
Reverse procedure to install. Lubricate new oil seal with DOAZ-19584-A grease, or equivalent. Apply suitable sealant to sealing surfaces. Tighten
flywheel attaching bolts to specifications.
