F 250 2WD Pickup V8-7.3L DSL (1990)
Figure 4
10.
Position the shaft seal remover tool T89P-19623-BH over the compressor shaft and push the tool into the nose of the compressor and down against
the shaft seal, Figure 4.
11.
Engage the end of the tool with the internal diameter of the shaft seal and turn the tool handle clockwise to expand the tool tip inside the seal inner
radius.
12.
Pull the shaft seal from the A/C compressor.
Figure 5
INSTALLATION
1.
Make sure the shaft seal protector tool that is included in the seal kit is not damaged, Figure 5.
2.
Lubricate the tool with clean refrigerant oil.
Figure 6
3.
Clean the inside of the compressor nose and shaft with a clean lint-free cloth.
4.
Coat the shaft seal with clean refrigerant oil.
5.
Position the seal over the shaft protector tool. Make sure the lip portion of the seal is pointed toward the large diameter end of the tool, Figure 6.
