F 250 2WD Pickup V8-7.3L DSL (1990)
Neutral Safety Switch: Adjustments
1.
Apply parking brake.
2.
Loosen 2 switch attaching bolts.
3.
Position transmission selector lever into Neutral. Rotate switch, then insert a 3/32 inch drill shank end into gauge pin holes of switch.
4.
Completely seat drill shank end into hole, then torque switch attaching bolts to 65 inch lbs.
5.
Remove drill shank end from switch.
6.
On 1992-93 models, rotate switch, then insert PNP alignment tool T92P-70010-AH into three notches in switch. Rotate tool if required to align all
three notches.
7.
Torque switch attaching bolts to 53-70 inch lbs., then remove alignment tool.
8.
On all models, check for proper operation of switch.
