F 250 2WD Pickup V8-7.3L DSL (1990)
Fig. 6 Caster/Camber Variation Chart
Caster and camber adjustment is possible with adjusters available in 1/2°, 1° and 1 1/2}° increments. Once adjuster is used to adjust both caster and
camber. Refer to Figs. 4 and 5, for adjuster replacement, then to Fig. 6, for adjuster variations.
F-250 HD & F-350
The caster angle on models with leaf spring front suspension can be adjusted by inserting a shim between the spring and axle. Shims are available in
increments of 0°, 1° and 2°. The 0° shim is used to adjust side to side ride height when an angled shim is installed on the opposite side of the axle.