F 250 2WD Pickup V8-7.3L DSL (1990)
Power Steering Pump: Service and Repair
Removal and Installation
1.
Disconnect return hose from pump reservoir and drain steering pump fluid into a suitable container.
2.
Remove pressure hose from pump.
3.
On models equipped with V belt, remove pump drive belt, then unfasten pump and adjusting bracket from support bracket. Remove pump
pulley, then the pump attaching bolts and pump.
4.
On models equipped with serpentine belt, remove the drive belt by lifting the belt tensioner out of position. Remove pump pulley, then the
pump attaching bolts and pump .
5.
Reverse procedure to install.