F 250 2WD Pickup V8-7.3L DSL (1990)
Intermediate Brake Drum
NOTE: Refer to the Intermediate Brake Drum image, when performing the following procedure.
1. Remove one-way clutch outer race, then the one-way clutch assembly with end caps.
2. Remove large brass thrust washer No. 7G401 from rear face of cylinder.
3. Remove small brass thrust washer No. 7D428 from front face of cylinder.
4. Remove snap ring.
5. Using screwdriver, remove snap ring, then the pressure plate and clutch pack. Tag parts for assembly reference.
Replacing Return Spring Snap Ring
6. Remove return spring snap ring as shown in the Replacing Return Spring Snap Ring image.
