ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Front Drive Axle - Identification Tags|Page 4405 > < Pressure Plate|Service and Repair|Page 4399
Page 1
background image

Differential Axle Housing: Technical Service Bulletins
Front Drive Axle - Identification Tags

Article No. 
92-5-14

February 26, 1992

AXLE - FRONT DRIVE AXLE IDENTIFICATION TAGS - 4X4
MODELS

LIGHT TRUCK:

1985-90 BRONCO II 
1985-92 BRONCO, F-150-350 SERIES, RANGER
1991-92 EXPLORER

ISSUE:

The 1991 and prior model front drive axles had identification information in the following three (3) places...

^

It was on a metal tag attached to a carrier cover mounting bolt.

^

It was stamped into the left side axle arm (tube) front face inboard of the U-Joint.

^

It was on a paper tape tag wrapped around the axle arm (tube).

The 1992 model year axles use a glue-on label that replaces all three of the prior identification markings, Figure 1. The new label is on the rear face of
the right hand arm (tube).

ACTION:

Since this glue-on label, Figure 1, is the only identification, be sure that the information on the label is recorded in a retrievable place
before any service actions are taken which will damage/destroy or remove the label.

OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES:

509000

Front Drive Axle - Identification Tags|Page 4405 > < Pressure Plate|Service and Repair|Page 4399