ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Engine - Noise/Vibration|Page 4606 > < Engine - Rough Idle/Rattle or Chatter Noise|Page 4601
Page 1
background image

Flywheel: All Technical Service Bulletins
Engine - Noise/Vibration

Article No. 
91-20-10

10/02/91

^ IDLE ROUGH - 7.3L DIESEL - 4x2 AND 4x4 VEHICLES

^ NOISE/VIBRATION - DUAL MASS FLYWHEEL - 7.3L DIESEL - 4x2 AND 4x4 VEHICLES

^ FLYWHEEL - NOISE/VIBRATION - 7.3L DIESEL - ZF5 MANUAL TRANSMISSION - 4x2 AND 4x4 VEHICLES

LIGHT TRUCK:

1987-91 F-250, F-350 1988-91 F SUPER DUTY, F-47, F-59

This TSB article is republished in its entirety to include additional labor time for 4X4 vehicles.

ISSUE:

With the engine at idle speed, the dual mass flywheel may go into resonance, resulting in objectionable noise and rough idle.

ACTION:

Replace flywheel and retaining bolts. Refer to the following procedures for service details.

1.

Inspect the flywheel dust cover as a source of the noise or vibration. Repair as required. If the dust cover is not the source of noise or vibration,
continue to step two.

2.

Remove flywheel and thoroughly clean face of crankshaft. Refer to the 1991 Light Truck Shop Manual Section, 03-01D, for flywheel service
details.

NOTE: DO NOT USE ORIGINAL RETAINING BOLTS. ALWAYS USE NEW RETAINING BOLTS. THE NEW BOLTS HAVE A GRAY

PRE-APPLIED SEALANT ON THE THREADS WHICH PREVENTS OIL SEEPAGE TO THE FLYWHEEL.

3.

Install new flywheel. Use new bolts. Refer to the Light Truck Shop Manual, Section 22-12, for flywheel installation details.

NOTE: CUSTOMER MAY EXPERIENCE AN INCREASE IN NEUTRAL GEAR ROLLOVER NOISE AFTER INSTALLATION OF THE NEW 

FLYWHEEL. THE NOISE OCCURS WITH THE TRANSMISSION IN NEUTRAL AND THE CLUTCH PEDAL RELEASED AND IS NOT
DETRIMENTAL TO THE VEHICLE.

PART NUMBER

PART NAME

CLASS

FITZ-6477-B

Flywheel Assembly

B

E7TZ-6379-A

Retaining Bolts

B

OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES:

91-14-11

WARRANTY STATUS: Eligible Under Basic Warranty 

Coverage, Powertrain 
Warranty Coverage

OPERATION DESCRIPTION

TIME

912010A

Replace - Flywheel (4X2)

3.7 Hr.

912010B

Replace - Flywheel (4X4)

4.7Hr.

DEALER CODING 

BASIC PART NO.

CONDITION CODE

6477

56

OASIS CODES:

497000, 499000, 597997, 608400, 703000, 703100

Engine - Noise/Vibration|Page 4606 > < Engine - Rough Idle/Rattle or Chatter Noise|Page 4601