ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Other Service Bulletins for Synchronizer Ring: > < M/T - ZF Model S5-42 Inspection Information
Page 2
background image

Figure 2

3. Reuse the gears if sufficient synchronizer reserve allowance is available and the teeth (dog teeth) are in good condition. Various acceptable wear

patterns on the taper cone are shown in Figure 2.

OTHER APPLICABLE ARTICLES: 88-8-20, 88-26-13
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES:

5100, 5104, 5200, 5300

All Other Service Bulletins for Synchronizer Ring: > < M/T - ZF Model S5-42 Inspection Information