F 250 2WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Submit 1864 claims using DWE for all completed vehicles. You may use your original 1863 for your record file copy.
WARRANTY AND POLICY MANUAL
See Section 6.3, pages 5 through 8, of your Warranty and Policy Manual for claims preparation.
REFUNDS
See Section 6.3, page 9 of your Warranty and Policy Manual. Use Customer Concern Code X99 for safety recalls.
Attachment II - Labor and Parts Information
LABOR ALLOWANCES
Inspect front bumper inner arm for green paint mark.
0.2 Hrs. - Insert in Box "A" on Form 1864
Install new front bumper U-clips and bolts if green paint mark is not found. (Includes Inspection).
0.5 Hrs. - Insert in Box "B" on Form 1864
Administrative Allowance
0.1 hrs.
NOTE:
Add Administrative Allowance to the total repair time.
PARTS REQUIREMENTS
Parts will not be direct shipped for this recall, Order your parts requirements through normal order processing channels.
Parts prices current until next issue of Master Price Book. For latest prices, check or call your:
-
Order Processing Center
-
DOES II
-
Updated Price Book
Attachment III - Technical Instructions
NOTE
Vehicles that have been serviced by the assembly plant will have a green mark painted on the front bumper left hand side inner arm. Inspect the
vehicle for this mark and, if present, submit a claim for inspection only.
Note:
Work on one side of the vehicle at a time to eliminate the need to completely remove the bumper from the vehicle.
