F 250 2WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Caliper Pin Installation
4. Tap the pin on the outboard end with a hammer. Continue tapping the pin inward until the retention tabs on the sides of the pin contact the spindle
face. Repeat procedure for the lower pin.
5. If removed, install the front brake hose to the front disc brake caliper and perform brake bleeding procedure.
6. Install the wheel and tire. Tighten the lug nuts to 190 Nm (140 ft lb).
7. Lower the vehicle, check the brake fluid level and fill as necessary. Check front disc brake calipers for proper operation.
