F 250 2WD Pickup V8-7.3L DSL Turbo VIN F (1994)
5.
Grab the tab of the wedge (Figure 7) with needle nose pliers and position it so that the small teeth on the concave surface are pointing up.
NOTE:
The Explorer/Ranger and Bronco/F-Series wedges are not the same.
The wedge for the Explorer/Ranger is black, and the wedge for the Bronco/F-Series is white. See Figure 8 for identification of the wedges.
6.
Using needle nose pliers, insert the wedge between the pawl and the ratchet with the flange of the wedge behind the pawl and ratchet. See Figure
9.
7.
Check that the wedge is properly located between the pawl and the ratchet and that the flange is behind the pawl and ratchet.