F 250 2WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Vacuum Pump: Testing and Inspection
A-1 Condition Isolation
^
Block the wheels and apply the parking brake.
^
Place the transmission in PARK or NEUTRAL.
^
Key ON engine running.
^
Disconnect the low-vacuum switch. Run engine at normal idle speed. Apply brakes.
^ Does brake warning light illuminate?
YES -- Condition related to the brake hydraulic system.
NO -- Condition related to the vacuum pump. Go to A2. See: A-2 Vacuum Pump Output