F 250 2WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Fan Clutch: Service and Repair
NOTE: The clutch assembly nut has a righthand thread and must be rotated counterclockwise to remove it.
1. Partially drain cooling system, then remove upper radiator hose and disconnect coolant reservoir hose at radiator.
2. Remove fan clutch from water pump pulley by turning clutch assembly nut. Use fan clutch holding tool No. T84T-6312-C, or equivalent, and fan
clutch nut wrench tool No. T93T-6312-B, or equivalent.
3. Remove fan shroud retaining screws.
4. Remove fan blade, fan clutch and shroud.
5. If fan blade and clutch must be separated, remove remaining bolts attaching fan blade to fan clutch.
6. Reverse procedure to install. Torque fan blade to fan clutch attaching bolts to 12-18 ft lb.