F 250 2WD Pickup V8-7.3L DSL Turbo VIN F (1994)
NOTE: Be careful when removing the rocker arm snap retaining clip. Do not lose the rocker arm steel ball.
13. Remove the snap retaining clip.
14. Remove the rocker arm and steel ball from the rocker arm pedestal.
INSTALLATION
1. Assemble the intake rocker arm or exhaust rocker arm assembly as follows:
a. Place the steel ball in the rocker arm cup and lubricate it with clean engine oil.
b. Place the rocker arm pedestal on the steel ball.
Rocker Arm Cutaway View
c. Snap the retaining clip over the rocker arm pedestal groove.
