F 250 2WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Rocker Arm Assembly
11. Remove the two rocker arm bolts (6A527).
12. Remove the rocker arm (6564) assembly.
13. Remove the push rod (6565).
NOTE: Be careful when removing the rocker arm snap retaining clip. Do not lose the rocker arm steel ball.
14. Remove the snap retaining clip.
15. Remove the rocker arm and steel ball from the rocker arm pedestal.
INSTALLATION
1.
Assemble the intake rocker arm or rocker arm assembly as follows:
a. Place the steel ball in the rocker arm cup and lubricate it with clean engine oil.
