F 250 2WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Fuel Injector Connector
7. Connect the electrical connectors to the fuel injectors and glow plugs.
8. Install the valve cover and retaining bolts. Tighten bolts to 11 Nm (8 ft lb).
9. Connect the engine harness electrical connectors to the valve cover gasket. Install the fuel injector harness clip.
10. Install the oil level indicator bracket, oil level dipstick and retaining bolts.
11. Install the alternator bracket (with alternator attached).
12. Install the alternator bracket retaining bolts. Tighten bolts to 40-55 Nm (30-40 ft lb).
13. Connect the alternator electrical connectors.
14. Install the drive belt.
15. Reposition the heater hose and install the alternator retaining bolt. Tighten bolt to 40-55 Nm (30-40 ft lb).
