F 250 2WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Oil Pan: Service and Repair
REMOVAL
1. Remove the engine assembly.
Oil Pan Bolts
2. Remove the twelve oil pan retaining bolts.
Removing Oil Pan Sealer
3. Remove the oil pan (6675) using Rotunda Quick Blade Release Cold Knife 163-OOO5 or equivalent to cut the RTV sealant on each side rail.
4. Pry up on one side of the oil pan to break the RTV seal at the engine front cover and engine rear cover and remove the oil pan.
5. Remove the oil pump screen cover and tube screws at the engine front cover and remove the nut retaining oil pump screen cover and tube (6622)
to the crankshaft main bearing cap stud (6345).
