F 250 2WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Oil Pump: Service and Repair
REMOVE
1. Remove the radiator.
2. Remove fan shroud and fan clutch.
NOTE: The fan clutch has right-hand threads.
3. Raise vehicle.
4. Remove flywheel inspection cover and screws.
NOTE: To prevent the crankshaft (6303) from rotating. use a breaker bar for in-vehicle service.
5. Install flywheel holding tool.
6. Remove crankshaft pulley bolt (6A340).
Vibration Dampner Removal
7. Remove crankshaft vibration damper (6316) using Damper Remover T79T-6316-A2 (part of T79T-6316-A), Adapter Bolts (part of Damper
Remover/Replacer Adapter Set T94T-6379-AH3), and Adapter T79T-6316-A3 (part of TT9T-6316-A).
Oil Pump Removal
8. Remove four oil pump housing bolts.
9. Remove oil pump body plate (6616) and square cut O-ring.