F 250 2WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Crankshaft Vibration Dampner
4. Install crankshaft vibration damper using Driver/Puller Screw T79T-6316-A1 (part of T79T-316-A), Driver Sleeve T79T-6316-A4 (part of
T79T-6316-A), and Thread Adapter (part of T94T-6379-AH3).
5. Install crankshaft pulley bolt and washer. Tighten crankshaft pulley bolt to 287 Nm (212 lb-ft).
6. Remove flywheel holding tool.
7. Install flywheel housing cover and screws. Tighten the screws to 17-23 Nm (13-17 lb-ft).
8. Lower vehicle.
9. Install radiator.
10. Install fan shroud screws and tighten screws to 5-8 Nm (44-71 lb-in).
NOTE: The fan clutch has right-hand threads. Install by turning nut clockwise.
11. Install fan and clutch assembly using Fan Clutch Nut Wrench T83T-83 12-B and Fan Clutch Pulley Holder T94T-8312-AH.
12. Check and refill engine oil.
