F 250 2WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Fuel Line Coupler: Specifications
Unless otherwise specified use standard torque chart. Torque values are with threads and washer faces coated with engine oil. Torque values are listed
without tolerance. Variations to torque will occur due to torque wrench calibration. Variation should be within 10% of nominal values.
Standard Torque 1/4 - 20 UNC
9.5 Nm
5/16 - 18 UNC
19 Nm
3/8 - 16 UNC
32 Nm
7/16 - 14 UNC
51 Nm
1/2 - 13 UNC
81 Nm
Pipe Threads
1/8 x 27
7-11 Nm
1/4 x 18
17-24 Nm
3/8 x 18
30-44 Nm
1/2 x 14
34-47 Nm