F 250 2WD Pickup V8-7.3L DSL Turbo VIN F (1994)
3.
Reprogram the 1994 and 1995 Electronic Engine Control (EEC) module to 1996 level using the February, 1996 or later update CD-ROM and
SBDS. Follow the directions and displays on the SBDS screen.
4.
After reprogramming is complete, an Authorized Modifications Decal (FPS 8262) must be installed on the fan shroud. The decal must be
completely filled out with the updated calibration information provided on the SBDS display screen.
5.
Diagnostics must now be performed using the NGS scan tool and the 1996 Powertrain Control/Emissions Diagnosis (PC/ED) Manual diagnostic
procedures.
6.
Use the OBD II Data Link Connector located under the instrument panel for NGS and SBDS hook-up.
7.
Select appropriate 1996 Service Manual on NGS scan tool to obtain correct Self-Test Modes and Parameter Identification (PID) menu.
Obtain an Authorized Modifications Decal and list the date, dealer number, and summary of modifications performed. Select a prominent place adjacent
to the Vehicle Emission Control Information Decal suitable for installing the Authorized Modifications Decal. Clean the area, install the decal, and cover
it with a clear plastic decal shield.
In the future, if a 1994 or 1995 PCM requires replacing due to failure, the 1996 model year PCM should be ordered. Refer to the following Parts Block
for correct part numbers.
OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES: 95-11-9, 95-06-05
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION
DESCRIPTION
TIME
960318A
Reprogram Powertrain
0.2 Hr.
Control Module (PCM)
Using Service Bay
Diagnostic System (SBDS)
960318B
Replace Powertrain Control
0.8 Hr.
Module (PCM)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
RECAL
08
OASIS CODES: 602300, 603300, 607000, 607400, 608000, 608400, 609000, 609400, 611000, 611500, 614000, 614500, 614600
