ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Bag Systems|Service and Repair > < Air Bag Serial Number|Page 8509
Page 1
background image

Air Bag: Description and Operation

The driver side air bag module is mounted in the center of the steering wheel. The module consists of:

^

Inflator

^

Airbag

^

Mounting plate and retaining ring

^

Steering wheel trim cover

Inflator 

NOTE:  The inflator is a component of the driver side air bag module and is not a serviceable item. The driver side air bag module is serviced
as a complete assembly.

When the sensors close, signaling a crash, electric current flows to the air bag inflator. Inside the inflator, an igniter converts the electrical
signal to thermal (heat) energy, causing the ignition of the inflator gas generant. This ignition reaction combusts the sodium azidel copper
oxide gas generant in the inflator, producing nitrogen gas, which inflates the air bag.

Air Bag 

NOTE:  The air bag is a component of the driver side air bag module and is not a serviceable item. The driver side air bag module is serviced
as a complete assembly.

The air bag:

^

Is constructed of neoprene coated nylon.

^

Is 711 mm (28 inches) in diameter.

^

Fills to a volume of 0.065 cu m (2.3 cu ft) in approximately 40 milliseconds.

Mounting Plate and Retaining Ring 

NOTE:  The mounting plate and retaining ring are components of the driver side air bag module and are not serviceable items. The driver side
air bag module is serviced as a complete assembly.

The mounting plate and retaining ring attach and seal the air bag assembly to the inflator. The mounting plate is also used to attach the trim
cover and to mount the entire driver side air bag module to the steering wheel.

Steering Wheel Trim Cover

NOTE:  The steering wheel trim is a component of the driver side air bag module and is not a serviceable item. The driver side air bag module
is serviced as a complete assembly.

The steering wheel trim cover is made of injection-moulded plastic and covers the air bag. When the supplemental air bag restraint system is
activated, tear seams moulded into the steering wheel trim cover separate, allowing inflation of the air bag.

Air Bag Systems|Service and Repair > < Air Bag Serial Number|Page 8509