F 250 2WD Pickup V8-7.3L DSL Turbo VIN F (1994)
F-Series SuperCab With Bucket/Captain's Chair Shown, F-Series/Bronco Similar
1. Remove trim cover from front safety belt retractor and tongue.
2. Remove anchor bolt from front safety belt retractor and tongue, anchor bolt to front floor pan, and front seat shoulder strap guide cover and
attachment. Remove buckle, if replacing.
NOTE: Disconnect driver's electrical connector before removing anchor bolt.
3. Remove front safety belt.
INSTALLATION
1. For Installation, follow removal procedures in reverse order.
2. Check sealer around anchor bolt holes. Add Ford Caulking Cord D6AZ-19560-A (ESB-M4G32-A) or equivalent, if necessary.
3. Tighten all bolts to 30-40 Nm (22-30 ft lbs).
