F 250 2WD Pickup V8-7.3L DSL Turbo VIN F (1994)
6. Tighten the replacement bolt to 30-40 Nm (22-30 ft lbs). Original parts are to be replaced with the repair parts indicated in the seat belt parts
replacement guides. Refer to the Parts Replacement Chart. Unless specified in the guides use original parts.
7. When repairing a multiple belt and attachment, install nut 382599-S100 to the bolt in the tunnel area from the underside of the floorpan. Tighten to
30-40 Nm (22-30 ft lbs).
Seat Belt Without Anchor Plate Thread Damage
REMOVAL
1. Remove damaged anchor reinforcement bolt and discard.
INSTALLATION
