F 250 2WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Suspension Spring ( Coil / Leaf ): Service and Repair
Rear
REMOVAL AND INSTALLATION
1. Raise and support rear of vehicle to a point where weight is relieved from rear springs and tires are still in contact with floor.
2. Remove spring U-bolts, and if equipped, the auxiliary spring and spacer.
3. Remove spring-to-bracket attaching nut and bolt from front of spring.
4. Remove upper and lower shackle attaching nuts and bolts from rear of spring, then lower spring and shackle assembly from vehicle.
5. Reverse procedure to install.