F 250 2WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Shift Cable: Adjustments
ADJUST
1. Place selector lever in Overdrive position, then hang a 3 lb weight from lever.
Shift Cable Replacement
2. Raise and support vehicle on a hoist, then remove shift cable from transmission lever ball stud.
3. Pull down lock tab on shift cable body, then position transmission shift lever in Overdrive position by moving lever to front-most position and
clicking back two detents.
4. Connect cable end fitting to transmission lever ball stud, then push up on lock tab to lock cable in correctly adjusted position.
5. Lower vehicle and remove weight from selector lever, then check park engagement and ensure transmission operation corresponds to all detent
positions.