F 250 2WD Pickup V8-7.3L DSL Turbo VIN F (1994)
a.
Remove the slave cylinder from the transmission.
b.
Holding the cylinder so that the port for the tube is at the highest point, slowly push the pushrod into the cylinder and slowly let it return. Be
sure the reservoir is full of fluid beforehand. Repeat this step two more times.
c.
Reattach the slave cylinder to the transmission.
d.
Rapidly depress the clutch pedal 10 times through a travel of about 1" (25.4 mm).
e.
If the pedal is not hard within .25" (6.35 mm) to .5" (12.7 mm) of travel, repeat Step d.
PART NUMBER
PART NUMBER
CLASS
C6AZ-19542-AA
Heavy Duty Brake
B
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS:
Eligible Under Bumper To Bumper warranty Coverage
OPERATION DESCRIPTION
TIME
931219A
On Vehicle Bleed
0.8 Hr.
Procedure - Concentric
Slave Cylinder Equipped
Vehicles
931219B
Master Cylinder Bench
1.1 Hrs.
Bleed Procedure -
Concentric Slave Cylinder
Equipped Vehicles
931219C
On-Vehicle Bleed Procedure
0.6 Hr.
- External Slave Equipped
Vehicles
DEALER CODING
BASIC PART NO.
CONDITION CODE
7A543
07
OASIS CODES:
505000, 505200, 506000, 590000