F 250 2WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Wiper Arm: Service and Repair
REMOVAL AND INSTALLATION
1. Disconnect battery ground cable.
2. Remove both wiper arms, blade assemblies and upper antenna assembly.
3. Remove cowl grille attaching screws and raise the grille slightly.
4. Disconnect washer nozzle hose, then remove cowl grille assembly.
5. Remove clip securing right and left linkage and the retaining clip from wiper motor arm.
6. Remove pivot body-to-cowl panel attaching screws, then the arm and pivot shaft assemblies.
7. Reverse procedure to install.