F 250 2WD Super Duty V10-6.8L (2009)
Trim Panel: Service and Repair
B-Pillar Trim Panel - Crew Cab
B-Pillar Trim Panel - Crew Cab
Removal and Installation
1. Remove the front and rear door opening scuff plate trim panels.
2. Position front seat(s) to the forwardmost position.
3. Remove the rear assist handles.
1. Remove the 2 covers.
2. Remove the 2 bolts.
-
To install, tighten to 12 Nm (106 lb-in).
3. Remove the B-pillar assist handle.
4. Position aside the front and rear door opening weatherstrips.
5. NOTE: Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or the cover does not
remain closed, install a new shoulder safety belt guide.
Remove the shoulder safety belt guide.
1. Position the shoulder safety belt guide cover upward.
2. Remove the shoulder safety belt guide bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
3. Remove the shoulder safety belt guide.
