F 250 2WD Super Duty V10-6.8L (2009)
Expansion Block/Orifice Tube: Service and Repair
Evaporator Core Orifice
Removal
All vehicles
1. Recover the refrigerant.
6.4L diesel vehicles
2. Remove the RH fender splash shield.
All vehicles
3. Disconnect the evaporator core orifice access fitting.
-
Discard the O-ring seal.
4. Inspect the evaporator core orifice for damage before attempting to remove it from the line.
5. If the evaporator core orifice is intact, engage the Fixed Orifice Remover/Installer. Hold the T-handle stationary while rotating the tool body to
remove the evaporator core orifice.