F 250 2WD Super Duty V10-6.8L (2009)
-
To install, tighten to 40 Nm (30 lb-ft).
-
Disengage the safety belt retractor anti-rotation tab from the sheet metal and remove the safety belt retractor.
4. NOTE: Before installation, make sure the safety belt webbing is not twisted and the safety belts and buckles are accessible to the occupants.
To install, reverse the removal procedure.
5. Check the active restraint system for correct operation. For additional information, refer to the appropriate Functional Test procedure in Safety
Belt System See: Testing and Inspection/Component Tests and General Diagnostics.
