F 250 2WD Super Duty V10-6.8L (2009)
3. Position the wheel spindle in a vise and remove the snap ring from the lower ball joint.
4. NOTICE: To avoid damage to the components, do not use heat to aid ball joint removal.
Using the C-Frame and Screw Installer/Remover and Ball Joint Installer/Remover, remove the lower ball joint.
5. Using the C-Frame and Screw Installer/Remover and Ball Joint Installer/Remover, remove the upper ball joint.
Installation
1. NOTICE: To avoid damage to components, do not use heat to aid installation.
NOTE: Clean the wheel knuckle ball joint bores.
NOTE: The upper ball joint must be installed first.
Using the C-Frame and Screw Installer/Remover and Ball Joint Installer/Remover, install the upper ball joint.
2. Using the C-Frame and Screw Installer/Remover and Ball Joint Installer/Remover, install the lower ball joint.
3. Install the snap ring in the groove at the bottom of the lower ball joint.
4. Install the lower ball joint grease plug.