F 250 2WD Super Duty V10-6.8L (2009)
Traction Bar: Service and Repair
Track Bar
Track Bar
Removal
NOTICE: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result
in major service expense. They must be replaced with the same part number or an equivalent part if replacement is necessary. Do not use a
replacement part of lesser quality or substitute design. Torque values must be used as specified during reassembly to make sure of correct
retention of these parts.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. NOTE: To prevent the front suspension from shifting when the track bar is removed, the front axle must be supporting the vehicle weight.
Load the front suspension with the vehicle weight.
1. Position a jackstand under both sides of the front axle assembly.
2. Lower the vehicle until the front axle is supporting the vehicle weight.
