F 250 2WD Super Duty V10-6.8L (2009)
Wheel Fastener: Service and Repair
Front Suspension
Wheel Studs - Single Rear Wheel (SRW)
Wheel Studs - Single Rear Wheel (SRW)
Removal
1. Remove the wheel hub and brake disc assembly. For additional information, refer to Wheel Bearing and Wheel Hub - F-250, F-350 See: Wheel
Bearing/Service and Repair/Front Suspension.
2. Using a suitable press, remove and discard the wheel stud.
Installation
1. Position the new wheel stud in the wheel hub and brake disc assembly, aligning the serrations in the disc brake rotor flange made by the original
wheel stud.
2. Using a suitable press, install the new wheel stud.
3. Install the wheel hub and brake disc assembly. For additional information, refer to Wheel Bearing and Wheel Hub - F-250, F-350 See: Wheel
Bearing/Service and Repair/Front Suspension.
Wheel Studs - Dual Rear Wheel (DRW)
Wheel Studs - Dual Rear Wheel (DRW)