F 250 2WD Super Duty V10-6.8L (2009)
12. Install the transfer case.
All vehicles
13. Start the engine. Move the selector lever through all the gear ranges, checking for engagements.
14. NOTICE: The use of any other transmission fluid than specified can result in the transmission failing to operate in a normal manner or
transmission failure.
With the vehicle in NEUTRAL, engine running and the transmission at normal operating temperature 66-77°C (150-170°F), check and adjust the
transmission fluid level, and check for any leaks. If transmission fluid is needed, add transmission fluid in increments of 0.24L (0.5 pt) until the
correct level is achieved (fluid should be in the hot range cross-hatched area of the transmission fluid level indicator).
