F 250 2WD Super Duty V10-6.8L (2009)
4. Connect the OTA transmission fluid cooler hoses.
Gasoline engine vehicles
5. Position the A/C condenser into the lower brackets and install the bolts.
-
Tighten to 8 Nm (71 lb-in).
6. Connect the hood release cable clip onto the power steering fluid cooler and install the bolts.
-
Tighten to 11 Nm (97 lb-in).
Diesel engine vehicles
7. Install the CAC and the bolts.
-
Tighten to 15 Nm (133 lb-in).
8. Connect the lower CAC hose and tighten the clamp.
-
Tighten to 12 Nm (106 lb-in).
9. Connect the upper CAC hose and tighten the clamp.
-
Tighten to 12 Nm (106 lb-in).
10. Position the fuel cooler and install the bolt.